SICK LMS5 Series, Руководство по эксплуатации

Страница: 16 / 94

3.5 Status indicators
Operator interface
The device works fully automatically in normal operation and requires no operator
intervention.
The SOPAS ET configuration software allows interactive configuration. For this, the
software runs on a computer which is connected to the device with one of the data
interfaces.
The graphic scan view in SOPAS ET is used to verify the generated measured values
and the measuring range online.
NOTE
Scans in SOPAS ET are not displayed in real time, but at a limited speed. Not all
measured values are displayed for this reason.
Status indicators
The LEDs and 7-segment display indicate the operational status of the device.
STOP
Q1
OK
Q2
5
3
4
1
6
2
Display Description
1
Device is either not in measuring mode (stopped by the user) or it is
running in measurement mode, but errors have occurred
2
Off: No contamination
On (lit up) Contamination warning
On (flashing): Contamination error
3
Device running in measurement mode without any errors
4
Reserved
5
The 7-segment display is used for diagnostics when errors or faults
occur
see "Indicators in the 7-segment display", page 82 .
6
At least one field is breached see "Linking of evaluation cases at the
output", page 42 .
It is recommended to also monitor the Device not ready operational status as well as
messages from the contamination measurement via the digital outputs of the sensor to
ensure the device readiness is continuously checked.
3
PRODUCT DESCRIPTION
16 O P E R A T I N G I N S T R U C T I O N S | LMS5xx 8013796/1ALS/2021-03 | SICK
Subject to change without notice