manualshive.com logo in svg

SICK Lector63x Flex C-mount, Руководство по эксплуатации

Поделиться
Скачать
SICK Lector63x Flex C-mount Скачать руководство пользователя страница 21

3.7

Function and use

The Lector63x Flex is available as a complete device and as a basic device. In the case
of a complete device, the device is assembled by SICK. In the case of a basic device,
the user assembles a custom device using the following components: camera housing,
lens, illumination unit, and optics protection hood. Depending on the configuration, it
may also be possible to use spacers, illumination unit connectors, spacer rings, and
filters. Use products from SICK as the components.

The Lector63x is available in a range of variants with S-mount, C-mount and compact
C-mount lenses. The S-mount variant is equipped with a fixed aperture and can also
be used for short working distances if spacer rings are used. The image sharpness can
be manually adjusted using the focus screw. The C-mount variant allows the focus and
aperture settings to be manually adjusted directly on the lens. The compact C-mount
variant comes with a fixed aperture and allows the focus to be manually adjusted on
the lens.

PRODUCT DESCRIPTION 

3

8018071/1E1C/2021-12-16 | SICK

O P E R A T I N G   I N S T R U C T I O N S | Lector63x Flex C-mount and S-mount

21

Subject to change without notice

Содержание Lector63x Flex C-mount



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды