manualshive.com logo in svg

SICK Lector62 Series, Онлайн руководство пользователя, Страница: 65 / 131

Поделиться
Скачать
SICK Lector62 Series Скачать руководство пользователя страница 65

168

FC1-Value within Code

The 

FC1-Value within Code

 parameter can be used to define an alternative character

for the separator (control character within the code) in the case of the EAN 128 code
format.

Up to three characters can be defined. The values must be entered as decimal num‐
bers.

169

Errors in L-pattern

According to the ISO/IEC 16022 standard, the code structure (L pattern) is not allowed
to have any gaps in it and must extend across the entire code height and width. If the

Errors in L-pattern

 parameter is activated, codes can still be read even if they contain

defective code structures.

This means that any gaps in the code structure are ignored during decoding. So that
the code can still be read, there must be a quiet zone around the code that is at least
five times as big as the cell size. This may increase the decoding time.

170

Error Score 1

The 

see "Error Score 1", page 65

 parameter is used to define a value that serves as the

definition of a correctly read character. This specified value must be achieved for the
character to be detected. If the value is not achieved, a “?” is output in the output for‐
mat for this character.

The parameter can also be used as a quality mark to detect poorly printed characters/
text, for example. The 

see "Error Score 1", page 65

 parameter can also be used to gen‐

erate an event, e.g., an output signal.

171

Fieldbus Gateway

All settings for connecting the reading device to a gateway are made on the 

Fieldbus

Gateway

 tab. The gateway can be configured directly via the reading device. The gate‐

way and reading device communicate via the serial interface.

The reading device is incorporated into the required fieldbus via a gateway.

172

Fixed size 1

A fixed symbol size can be selected using the 

Fixed size 1

 parameter. Only codes with

this symbol size are read.

By defining the specific symbol sizes that are permissible, you can restrict the range of
codes to be read. This can lead to a reduction in the decoding time.

173

Fixed size 2

A fixed symbol size can be selected using the 

Fixed size 2

 parameter. Only codes with

this symbol size are read.

By defining the specific symbol sizes that are permissible, you can restrict the range of
codes to be read. This can lead to a reduction in the decoding time.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E   H E L P | Lector62x

65

Subject to change without notice

Содержание Lector62 Series




































































































































Отзывы:

Нет отзывов