SICK Lector62 Series Скачать руководство пользователя страница 123

Страница: 123 / 131

375

Tx Header

The

Tx Header

parameter is used to define a header for the received data, which is

applied when the data is output. Once the data has been received, the

Rx Header

and

Rx Terminator

are removed. The string is reframed with the

Tx Header

and

Tx Termina‐

tor

so that it can be output.

The input is restricted to two characters and must be entered via the context menu or

the

button. It is possible to enter control characters and constants. The input

field is highlighted in red if invalid characters are entered.

376

Tx Terminator

The

Tx Terminator

parameter is used to define a terminator for the received data, which

is applied when the data is output. Once the data has been received, the

Rx Header

and

Rx Terminator

are removed. The string is reframed with the

so that it can be output.

The input is restricted to two characters and must be entered via the context menu or

the

button. It is possible to enter control characters and constants. The input

field is highlighted in red if invalid characters are entered.

377

Monitored Devices

The

Monitored Devices

parameter is used to specify the device IDs of the nodes that

are to be monitored by the reading device. The device IDs are separated by commas.

NOTE

The input field is highlighted in red if an invalid entry is made.

Max. startup time for the monitored devices

The

Max. startup time for the monitored devices

parameter defines an interval in sec‐

onds for the startup time of the monitored devices. A node is considered available if the
time gaps between the sent signals are within the specified interval.

378

Monitoring

The CAN network monitoring function is activated and configured in the

Monitoring

group.

assign to

The

assign to

parameter is used to activate or deactivate the CAN network monitoring

function for the reading device.

•

DEACTIVATED

: The device does not monitor any other reading devices.

•

CAN

: The reading device monitors other reading devices on the CAN bus. The

device responsible for monitoring detects which nodes are available and which
devices have dropped out.

SOPAS PARAMETER OVERVIEW

8013778/YPV6/2016-01-14 | SICK

O N L I N E H E L P | Lector62x

123

Subject to change without notice

Содержание Lector62 Series




































































































































Результаты поиска

Содержание Lector62 Series

Отзывы:

SICK Lector62 Series, Онлайн руководство пользователя, Страница: 123 / 131

Результаты поиска

Содержание Lector62 Series

Отзывы: