3.
Press the Mode button.
OUT
4.
Use the plus or minus button to select coPY. The preset value flashes.
OUT
5.
Press the Mode button.
6.
Use the plus or minus button to select no or YES.
OUT
Deactivated (factory setting)
OUT
Active
7.
Press the Mode button.
7.6.8
Setting master teach-in
Teaching all connected expansion units with master teach-in is only available in bus
operation.
WARNING
If the KTL180 is combined with the WLL180T on the bus (
), then the master teach-in is used neither in the KTL180 nor in the
WLL180T. Unplanned parameter changes can occur during use. If the master teach-in
function is used on accident, then it may be necessary to reset every device on the bus
to the factory settings to ensure the specified function.
NOTE
Locked (LocL1 or 2) expansion units are not taught.
1.
Press and hold the Mode button for 2 s. The Configuration operating mode is
active.
2.
Use the plus or minus button to select Pro.
OUT
3.
Press the Mode button.
4.
Use the plus or minus button to select Atch.
OUT
5.
Press the Mode button. The preset value flashes.
OUT
6.
Use the plus or minus button select no or YES.
OPERATION
7
8023304.11XV/2018-11-29 | SICK
O P E R A T I N G I N S T R U C T I O N S | KTL180
33
Subject to change without notice
