SICK ICR803, Руководство пользователя

Страница: 27 / 96

- 27 -
Intercharacter, Interfunction, and Intermessage Delays
Some terminals drop information (characters) if data comes through too quickly. Intercharacter,
interfunction, and intermessage delays slow the transmission of data, increasing data integrity.
Each delay is composed of a 5 millisecond step. You can program up to 99 steps (of 5 ms each)
for a range of 0-495 ms.
Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed between the transmission of each
character of scanned data. Scan the
Intercharacter Delay bar code below, then scan the number
of milliseconds and the SAVE bar code using the Programming Chart (Appendix D)
To remove this delay, scan the Intercharacter Delay bar code, then set the number of steps to 0.
Scan the SAVE bar code using the Programming Chart (Appendix D).
User Specified Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed after the transmission of a
particular character of scanned data. Scan the
Delay Length bar code below, then scan the
number of milliseconds and the SAVE bar code using the Programming Chart (Appendix D) .
Next, scan the Character to Trigger Delay bar code, then the 2-digit hex value for the ASCII
character that will trigger the delay ASCII Conversion Chart (Appendix B) .
To remove this delay, scan the
Delay Length bar code, and set the number of steps to 0. Scan the SAVE
bar code using the Programming Chart (Appendix D).