6
8018429/1DWP/V3-0/2022-06| SICK
A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | GMS840
Subject to change without notice
1
FOR YOUR SAFETY
1.1.3
Information symbols
1.2
Responsibility of user
●
Make sure the user has read and understood this Addendum to the Operating
Instructions, the Operating Instructions of the device and the safety instructions.
●
Observe all safety instructions.
●
If there is something you do not understand: Contact SICK Customer Service.
●
This Manual presumes that the device has been delivered as specified during project
planning (i.e., based on the SICK application questionnaire) and the relevant delivery
state of the device (see delivered System Documentation).
– Contact SICK Customer Service if you are not sure whether the device corresponds to
the state defined during project planning or to the delivered system documentation.
●
Only use the device as described in “Intended use”;
the manufacturer assumes no responsibility for any other use.
●
Maintenance work should be performed as prescribed in this Manual.
●
Do not attempt any work on or repairs to the device unless described in this Manual.
●
Do not remove, add or change any components in or on the device unless such changes
are officially allowed and specified by the manufacturer.
Failure to observe these precautions could result in:
– voiding the manufacturer's warranty
– the device could become dangerous
– the approval for use in potentially explosive atmospheres is no longer valid
Symbol
Significance
Information on product condition with regard to protection against explosions (general)
Note on product properties with regard to Explosion Protection Directive
ATEX 2014/34/EU
Important technical information for this product
Important information on electric or electronic functions
