20
8024493/AE00/V1-0/2020-09| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
3
PRODUCT DESCRIPTION
3
Product description
3.1
Product identification
The measuring system comprises the components sender/receiver unit and control unit.
The characteristics of the sender/receiver unit mainly determine the practical applicability
of the measuring system, therefore the designation of the sender/receiver unit is the same
as the designation of the measuring system. The selection of individual components is the
responsibility of the operator of the measuring system.
Table 5: Product identification
Type plates
Fig. 4: Type plate, sender/receiver unit and control unit (example)
With the help of the type plate, it is possible to identify the device and the possible areas of
application perfectly by means of the explosion protection types.
Measuring system
DUSTHUNTER SP100 Ex-2K
Manufacturer
SICK Engineering GmbH
Bergener Ring 27 · D-01458 Ottendorf-Okrilla · Germany
Components:
Sender/receiver unit
DUSTHUNTER SP100 Ex-2K
Device version
Version for potentially explosive atmospheres zone 1/21
Type plate
Sender/receiver unit: On right side
Components:
Control unit
MCUDH Ex-3K
Device version
Version for potentially explosive atmospheres zone 2/22
Type plate
Control unit: On left side
Nr.
Variable
Barcode
Type code
Part No.
Serial number
Minimum gas temperature
Maximum gas temperature
Nominal length
Year of manufacture
Inspection body number