Chapter
5
Operating Instructions
CLV 42x bar code scanner
5-10
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8 009 981/O078/16-08-2004
Electrical connection
For connecting the switching outputs via the CDB 420 or CDM 420 Connection Module, see
the “
CDB 420 Connection Module“ Operating Instructions (order no. 8 010 001,
German/English version)
respectively the
“CDM 420 Connection Module“ Operating
Instructions (order no. 8 010 004, German/English version).
Note
If the "Device Ready" function is chosen, the CLV outputs a static pulse in Reading mode.
Tip
The output function, pulse duration (timer) and polarity of the signals can be changed on the
D
EVICE
C
ONFIGURATION
tab in the CLV Setup program.
Click the R
ESULT
O
UTPUT
P
ARAMETERS
button. Edit dialog box.
Download all changes to CLV.
Recommendation
To check the switching functions using a high-impedance digital voltmeter, power the
outputs.
This prevents incorrect voltage values/switching statuses from being displayed.
Fig. 5-6:
Connections of the "Result 1" switching output
V
S
CLV 42x
"Result 1"
V
S
= + 10 to +30 V DC
Pulse duration
based on setting:
– 10 ms to 990 ms
– 00: static
(to the end of the
next reading pulse)
Structure of output
Result 2 (pin 13)
same as output Result 1
V
o
Switching mode
PNP-switching with respect to the power supply V
S
Characteristics
short-circuit-proof + temperature-protected,
not electrically isolated from V
S
Function assignment
(default setting)
Result 1: "Device Ready (static)", polarity: not inverted
Result 2: "Good Read" (100 ms), polarity: not inverted
Electrical values
0 V
≤
V
o
≤
V
S
Guaranteed: (V
S
−
1.5 V)
≤
V
o
≤
V
S
at I
o
≤
100 mA
Table 5-7: Characteristic data of the "Result 1" and "Result 2" switching outputs
