background image

O P E R AT I N G   I N S T R U C T I O N S   |  C F P   C U B I C 

8021989 / 2017-10-20 | SICK AG

Subject to change without notice

2 8

8

OPERATION

Configuration

Configure the Qx switching output as input (using Q1 as a redundant overfill protection 

example).

Note:

The switching output designation (Q1 in the example here) changes according to the 

selected process variable to be output: Q1-LVL or Q1-TEMP is now Q1-INP.

1. 

Log in to Exprt mode, see 

“8.2.2 Exprt mode”.

2. 

Configure Q1 as input.

 

Set the parameter to INPUT in the Q1-### / MODE1 menu.

3. 

Configure the action to be performed when the signal is present.

 

Set the parameter to MAXLVL in the Q1-INP / ACTIO1 menu (if the external 

signal is present, the CFP Cubic outputs the 

MAXLVL status).

4. 

Configure the form of the external signal.

 

Set the parameter to NO (normally open) in the Q1-INP / POL1 menu.

8.4 

Configuration of analog outputs

8.4.1 

Automatic signal detection

The CFP Cubic can automatically detect if a 4–20 mA or 0–10 V signal is required 

using the connected output load.
The following rules apply:

 

4 mA to 20 mA if load < 500 ohms at U

V

 > 15 V

 

4 mA to 20 mA if load < 350 ohms at U

V

 > 12 V

 

0 V to 10 V if load > 750 ohms at U

V

 ≥ 14 V

Configuration

Note:

The analog output designation (QA in the example here) changes according to the 

 selected process variable to be output.

1.  Perform automatic signal detection.

 

Set the parameter to AUTO in the QA-### menu.

Note:

Automatic signal detection is only active when the device is switched on for the first 

time. After this, the function can be activated again with 

AUTO in the QA-### menu.

Содержание CFP CUBIC

























































Отзывы: