SICK Bulkscan, Руководство по эксплуатации

Страница: 50 / 112

O P E R AT I N G I N S T R U C T I O N S | Bulkscan® 8014829/ZV98/2018-05-07 | S I C K
Subject to change without notice
5 0
ELECTRICAL INSTALLATION
6.2.6 Serial interface connection of Bulkscan® LMS111
2
1
8
7
6 5
4
3
Fig. 32: Pin assignment of the "Data" connection (8-pins M12 male connector, A-cod-
ed)
Pin Signal Function
1 RxD Receiver RS232 (Host interface)
2 TxD Transmitter RS232 (Host interface)
3 Reserved Do not use!
4 Reserved Do not use!
5 GND RS Ground RS232
6 IN1 Switching input 1
7 IN2 Switching input 2
8 GND IN Ground digital input 1 + 2
Tab. 10: Bulkscan® LMS111 Pin assignment of the “Data” connection (M12x8 male
plug, A-coded)
6.2.7 Connection of the digital inputs/outputs on Bulkscan® LMS111
1
2
3
4
5
6
7
8
Fig. 33: Pin assignment of the “I/O” connection (8-pins M12 female connector, A-
coded)
Pin Signal Function
1 ENC1 Encoder input 1
2 ENC2 Encoder input 2
3 GND ENC Ground encoder inputs
4 OUT1 A Switching output 1, contact A
5 OUT2 A Switching output 2, contact A
6 OUT3 A Switching output 3, contact A
7 OUT1...3 B Switching output 1...3, contact B
8 OUT1...3 R Switching output 1...3, resistor moni-
tored
Tab. 11: Bulkscan® LMS111: Pin assignment of the “I/O” connection (8-pins M12
female connector, A-coded)