6
ELECTRICAL INSTALLATION
28
8017621/ZPQ5/2017-08-15|SICK
S U P P L E M E N T A R Y O P E R A T I N G I N S T R U C T I O N S | AOS502 STS
Subject to change without notice
•
When using a common cable, signals of the same type are routed together in one wire
and are branched via the local distributor/distributor box to the laser scanner. The
voltage supply
,
ground
, and
control input
of the laser scanner in question are routed
together
as
one signal
.
•
Shielded
cables must always be used.
Connecting wires in the distributor box
▸
Refer to the suggested pin assignment for the distributor box below.
Fig. 26: Connection of a distributor box (suggestion)
•
The jumpers between terminals 01 and 10, 02 and 11, and 3 and 12 are to be placed
on-site.
Notes
Notes
