SICK IVP IVC-3D 200 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 40

SICK IVP IVC-3D 200 Скачать руководство пользователя страница 20

Chapter

4

Operating Instructions

IVC-3D

20

SICK IVP • Industrial Sensors • www.sickivp.com • All rights reserved

8011007

Getting Started

4.2.2

Programming Window

When you write a program, the main window contains a few additional parts:

Toolbar – contains the tools that can be used with the device.

Program List – shows the tools used in the program and the parameters for each tool.

Table – shows the contents of the device’s table.

Image Banks – shows thumbnails of the images currently in the image banks of the

device (if any). The images can be either 3D images or profiles.

Preview – shows the result of the program step when applied to an image.

Toolbar

Tree View

Image Banks

Preview

Table

Program List

The

toolbar

actually contains several toolbars on which the tools are grouped into catego-

ries. You switch between the categories by clicking the tabs at the bottom of the toolbar.
The

program list

shows each step in the program as a table. Each step contains:

The input parameters that can be set for the tool

The execution time for the tool when executed

The result (return values) from the tool

The program list has four columns that are used for specifying parameter values:

Value

,

Table

,

Step

and

Result

. Which column to use depends on what type of parameter value you

want to use; a constant value, a value from the table, or a result from a previous step.

Image banks

are used for storing images, just like the table is used for storing values. This

can be very useful, for example if you want to modify the image, but need to use the
original image later on in the program. Note that the images are stored in the camera, and

that the images in the image banks remain there until they are removed or overwritten by
other images.
When working with the IVC-3D camera there are two types of image banks: one that con-
tains 3D images and one that contains profiles. Which image banks that are of each type

depends on how the camera is configured.
The

preview

window is used by some tools for visualizing the result of the tool. This preview

is useful when you develop your program, but is not generated when the program is run-
ning. The preview window may also be used for setting parameters for certain tools. This is

further described later in this chapter.

«
...
18
19
20
21
22
...
»

Содержание IVC-3D 200









































Отзывы:

Нет отзывов