SICAT OPTISLEEP, Руководство пользователя

Страница: 9 / 20

Securing the connector
The connector is connected with the upper and lower jaw splint via holding pins.
In order to secure a connector in place, this needs to snap into the holding pin of the
splint. To do this, apply slight pressure and guide the long hole of the connector per-
pendicularly to the splint via the holding pin. The connector then snaps into place with
a click.
When securing the connector, please make sure that you hold the splint with the
other hand so that the splint is not overly strained.
There are various versions of splints and connectors that differ only slightly from each
other. Please note that they must not be combined. Please discuss with your doctor
which connectors should be used when changing in order to prevent a loss of function
of your splint.
Please use the SICAT OPTISLEEP connectors V1.1 for SICAT OPTISLEEP V1.1.
9