13
AUTO MODE:
Select AUTO mode (AM sign appears at the
left bottom corner of display) for automatic measurement
of inductance, capacitance or resistance.
Note
: In the AUTO mode ST uses 1kHz test frequency by
default and has a limited sensitivity. Automatic detection
may not work for small value capacitors and inductors.
In this case 10kHz test frequency must be used..
RESISTANCE MODE:
Enables Resistance measurement mode.
See section MEASUREMENT FEATURES for more information.
INDUCTANCE MODE:
Enables Capacitance measurement mode.
See section MEASUREMENT FEATURES for more information.
CAPACITANCE MODE:
Enables Capacitance measurement mode.
See section MEASUREMENT FEATURES for more information.
IMPEDANCE MODE:
Enables the Impedance measurement mode.
Note:
See section MEASUREMENT FEATURES for more information.
ESR MODE:
Enables the ESR measurement mode. See section
MEASUREMENT FEATURES for more information.
DIODE TEST MODE:
Enables diode test mode showing
diode polarity or SHORT indicating a faulty diode
DCR MODE:
Enables DCR resistance measurement mode.
The DCR measurement measures the resistance of an
unknown component by applying DC voltage.
