siat SR4-S Type A, Инструкция по эксплуатации и список запасных частей

Страница: 6 / 80

SIAT S.p.A.
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
WARRANTY
Within the limits of what is set forth below, Seller agrees to repair or replace without cost to Buyer any defective goods when such de-
fect occurs within a period of twelve (12) months from the date in which Seller's goods have been put into use, but in no event beyond
thirteen (13) months from the date of shipment.
Expressly excluded from this warranty are those parts subject to normal wear and tear (by way of illustration, but not limitation, such
parts as belts, rubber rollers, gaskets, brushes, etc.) and electrical parts.
Buyer must immediately notify Seller of any defect, specifying the serial number of the machine.
Buyer shall send to Seller the defective item for repair or replacement. Seller will perform the repairs or provide a replacement within a
reasonable period of time.
Upon effecting such repair or replacement, Seller shall have fulfilled its warranty obligations. In the event the repairs or replacement
must be effected at the place where the machine is installed, all expenses for labor, travel and lodging of Seller's personnel shall be
sustained by the Buyer. Buyer will be invoiced in conformity with Seller's standard charges for the services rendered.
Seller is not responsible for defects resulting from:
- Improper use of the machine
- Lack of proper maintenance
- Tampering with the machine or repairs effected by the Buyer.
Seller will not be liable for any injury to persons or things or for the failure of production. With respect to the materials not manufactu-
red by Seller, such as motors and electrical equipment, Seller will grant to Buyer the same warranty Seller receives from its supplier of
such materials. Seller does not warrant the compliance of its machines with the laws of non-EEC countries in which the machines may
be installed, nor does it warrant compliance with laws or standards relating to the prevention of accidents or pollution.
Adaptation of Seller's machines to the aforesaid laws or standards shall be the responsibility of Buyer who assumes all liability there-
fore.
Buyer shall indemnify and hold Seller harmless against any claim by third parties resulting from failure to comply with the aforesaid laws
and standards.