siat SM446-650-HD Скачать руководство пользователя страница 8

Страница: 8 / 99

ENGLISH

April 2013

3-SAFETY

SKILL 2

MECHANICAL MAINTENANCE TECHNICIAN

This operator is trained to use the machine as the MACHINE OPERATOR and in addition is able to work with

the safety protection disconnected, to check and adjust mechanical parts, to carry out maintenance operations

and repair the machine.

He is not allowed to work on live electrical components.

SKILL 2a

ELECTRICAL MAINTENANCE TECHNICIAN

This operator is trained to use the machine as the MACHINE OPERATOR and in addition is able to work with

the safety protection disconnected, to make adjustments, to carry out maintenance operations and repair the

electrical components of the machine.

He is allowed to work on live electrical panels, connector blocks, control equipment etc.

SKILL 3

SPECIALIST FROM THE MANUFACTURER

Skilled operator sent by the manufacturer or its agent to perform complex repairs or modifications, when agreed

with the customer.

3.3

INSTRUCTIONS FOR A SAFE USE OF THE MACHINE

Only persons who have the skills described on the following paragraph

3.6

are allowed to work on the ma-

chine.

It is responsibility of the user to appoint the operators having the appropriate skill level and the appropriate

training for each category of job.

3.4

STATE OF THE MACHINE

List of the modes which are possible with this machine:

- automatic running;

- running with safety protections removed or disabled;

- stopped by using the main switch;

- stopped by using the lockable emergency stop button;

- electric power disconnected;

- compressed air disconnected.

Содержание SM446-650-HD




































































































Результаты поиска

Содержание SM446-650-HD

Отзывы:

Бренды по названию

Популярные бренды

siat SM446-650-HD, Инструкция по эксплуатации и список запасных частей

Результаты поиска

Содержание SM446-650-HD

Отзывы:

Бренды по названию

Популярные бренды