Servicing Manual
13
yes
SWITCH
ON
THE HEATER STARTS
no
For operation without remote
thermostat, check that the
thermostat socket cover is
correctly inserted
in the socket
•
Wait 30 seconds and push to
reset
Check that the red lock-out
warning light is not alight
•
See chapter 3...
•
Replace the burner control unit
•
Replace with a new one with
identical ratings
•
Check connections
•
Set a temperature value higher
than room temperature
Check that the remote
thermostat is properly
connected and adjusted
•
Check the metal bridge inside
the cover
•
Reinsert and lock
Check the burner control unit
•
Open the inspection cover and
push to reset
Check that the overheat
thermostat has not been
activated
Check for correct voltage
rating ( see data plate)
•
Check all electrical connections
•
Check the warning lamp
Check fuse (burn-outs,
damages, etc.)
Check that the green warning
lamp on the control panel is
alight
