Manual_UK_K_K_rev. 1_10_2013
pag. 20
Transport / handling MUST take place only when patio-heater is cold
(safety of people
and protection of its components),
TAKING CARE TO SECURE THE GLASS TUBE (model
KALIENTE - SOLFLAME) WITH CLAMPS
Nozzle replacement
In case there is the need to change the type of gas, different from that the heater has been
tested,
it is necessary to require SIABS the correct conversion kit specifying the
appliance model, serial number
(inside the gas bottle compartment, Picture 13)
and the
new gas type.
The operation must be performed by qualified personnel, preferably SIABS
service center, in accordance with the regulations in force.
Picture 13
IMPORTANT
: if you change the gas nozzle to change type of gas (e.g. from LPG to natural
gas)
it is COMPULSORY to change the PRESSURE STABILIZER – only for manual start-
up version – and to change the plate label with technical data
and place one with the
new data, then repeat the checks at pages 13 and 14 "PUT in OPERATION and FIRST START-
UP"
Patio-heater KALIENTE-SOLFLAME:
to replace the gas nozzle remove two panels of the gas
bottle compartment, remove the cover plate of the burner unit (Picture 14) and unscrew the
brass gas nozzle with M13 key (Picture 15). Place the new nozzle and tighten with the
spanner, fix the cover plate of the burner.
Picture 14
Picture 15
Patio-heater KALOR-SOLEIL:
to replace the gas nozzle remove one of the protection grids,
remove the perforated screen and unscrew the brass gas nozzle with M13 key (Picture 16).
Mount the new nozzle and tighten with the spanner, position the perforated screen and the
protection grid.
