SIA SIA-12-L35-CR-TS-9050, Инструкция по установке, эксплуатации и обслуживанию, Страница: 11 / 24

11
OPERATION
First time connection of power (standard software & default settings)
It is important to review the default settings (see table below). Please note your controller may have been pre-
programmed to your application’s specifications.
Setting Setting Purpose Default
Value All Values
Units The type of units used. Metric Metric; US
Power On State Sets what happens to
the Timer when power is
applied. Resume
Mode Sets the pump running
conditions. Auto Cont - Pumps continuously
Auto - Pumps to chosen Flow Rate
Fixed - Pumps to chosen On/Off Times.
Batch - Pumps to chosen On/Off Times
at different times/days of week.
On Time Sets the On Time (in
seconds) used in Fixed
Mode 2 1 - 60
Off Time Sets the Off Time (in
seconds) used in Fixed
Mode 10 1 - 60
Flow Rate Sets the desired flow rate in
Auto Mode.
1.0 LPH
Pump Size Aligns the Timer with the
pump size. L25 1/4” L15 1/8” L75 3/4”
L25 1/4” L100 1”
L35 3/8” L150 1 1/2”
L50 1/2” L225 2 1/4”
Battery Voltage Sets the battery voltage. Auto 12V; 24V; AUTO
Low Power
Voltage Sets the battery voltage
that will trigger Low Power
Mode. 12.1
Cut Out Voltage Sets the battery voltage that
will turn the pump off. 11.8
Restore Voltage Sets the battery voltage that
will turn the pump back on
after Cut Out. 11.9
Power Save
Percentage Sets the percentage of the
flow rate in Low Power
Mode.
50
SIAT75001 SiA Smart Controller
Revision: TH1