SIA D0102, Инструкция по эксплуатации, Страница: 6 / 18

Before attempting the connection
,
check whether the voltage indicated
on the rating plate corresponds to
the actual mains voltage
.
Mains lead should be minimum1
.
5m
long
.
Earthing wire should be installed in
such manner to be the last one pulled
out in case the safety relief device of
the mains lead should fail
.
Mains lead behind the oven must be
placed in such manner to avoid
touching the back panel of the oven
because of the heat it develops
during operation
.
The cable of correct size rating please
oven
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the E terminal.
Recommended
type of
connection
lead
1
For 220-240V earthed one-phase
connection, bridges connect 1-2-3
terminals and 4-5 terminals, safety
wire to
L1
N
PE
H05VV-F3G4
L1=R, L2=s, L3=T, N=earth terminal, PE=safety wire terminal
1 2 3
4
.
The connection cable must be secured in a strain
- relief clamp.For the connection leads,
the grounding wire must be longer than the other wires.
Caution
!
Remember to connect the safety circuit to the connection box terminal marked with . The
electricity supply for the cooker must have a n all
-
pole disconnection switch which enab -
les the power to be cut off in case of emergency. The distance between the working
contacts of the safety switch must be at least 3 mm.
Before connecting the cooker to the power supply it is important to read the information on
the manual.
follow the below diagram.
10
11
Control Panels