Главная
/
Si-tex
/
SAS-300
/
Руководство по эксплуатации

Si-tex SAS-300, Руководство по эксплуатации

Поделиться

Страница: 73 / 104

$background image$

- 66 -

Notices

To maximise performance and minimise human exposure to radio frequency electromagnetic energy
you must make sure that the antenna is mounted at least 1.5 metres away from the AIS transceiver
and is connected to the AIS transceiver before power is applied. The system has a Maximum
Permissible Exposure (MPE) radius of 1.5m. This has been determined assuming the maximum power
of the AIS transceiver and using antennas with a maximum gain of 3dBi.The antenna should be
mounted 3.5m above the deck in order to meet RF exposure requirements. Higher gain antennas will
require a greater MPE radius. Do not operate the unit when anyone is within the MPE radius of the
antenna (unless they are shielded from the antenna field by a grounded metallic barrier). The antenna
should not be co-located or operated in conjunction with any other transmitting antenna. The required
antenna impedance is 50 Ohms.

Warranty

This product is supplied with standard warranty as defined in the accompanying warranty information.

Any attempt to tamper with or damage this product will invalidate the warranty.

Disposal of this product and packaging

Please dispose of the AIS transceiver in accordance with the European WEEE Directive or with the
disposal of electrical equipment.
Every effort has been made to ensure the packaging for this product is recyclable. Please dispose
environmentally friendly manner.

Accuracy of this manual

The AIS transceiver may be upgraded from time to time and future versions of the AIS transceiver may
therefore with this manual. Information contained in this manual is liable to change without notice. The
manufacturer liability for consequences arising from omissions or inaccuracies in this manual and any
other documentation

Declaration of conformity

The manufacturer of this product declares that this product is in compliance with the essential
requirements R&TTE directive. The declaration of conformity is provided with the product document
pack. The product carries the CE mark, notified body number and alert symbol as required by the
R&TTE directive. The product is intended for sale in the following member states: Great Britain,
France, Spain, Sweden, Denmark, Norway, Belgium, Italy, Finland, Ireland, Luxembourg, Germany
and Czech Republic.

«
...
71
72
73
74
75
...
»

Содержание SAS-300









































































































Отзывы:

Нет отзывов

Похожие инструкции для SAS-300

Бренд: Vahle Страницы: 96

Бренд: Rangevision Страницы: 28

Бренд: Mandam Страницы: 9

Бренд: IDEAL Networks Страницы: 60

Бренд: IceCure Страницы: 104

Бренд: Tascam Страницы: 3

Бренд: UNIS Страницы: 16

Bathomatic Basic

Бренд: Unique Automation Страницы: 10

Бренд: Additel Страницы: 139

Бренд: MAKSIWA Страницы: 155

Бренд: olympia electronics Страницы: 2

Бренд: Zodiac Страницы: 32

Бренд: Teac Страницы: 2

Бренд: Advwin Страницы: 8

POWER RUN 14.0 HRC

Бренд: Energetics Страницы: 43

My Green Platform Bed

Бренд: My Green Mattress Страницы: 2

Бренд: Monteris Medical Страницы: 158

Бренд: Bard Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды