Seite
23
von
27
10. To switch off the timer, click the
- button until the
heating FUNCTION
appears on
the display.
NOTE
Please note, that the temperature can´t be set, whilst the TIMER is on.
Turn off the timer to set the desired temperature.
SAVING MODE
The SHX panel is equipped with a saving mode, to save electricity.
As soon as you open the window in the room where the heating panel is located or the ambient
temperature drops by more than 3 ° C, the device switches off automatically to save electricity.
As soon as the device detects the temperature difference, the "OPEN WINDOW" symbol
appears on the display.
Close the open window or door, switch the device on again and set the desired target
temperature.
NOTE
It may happen that the "OPEN WINDOW
" symbol appears on the display even though no
window is open - this means that the device detects a breeze - but it does not affect
operation.
To remove the symbol from the display, press and hold the
button until the symbol goes
out.
DISABLING THE ADAPTIVE SHUT-OFF FUNCTION /
The adaptive switch-off function is a standard factory setting for the panel. However, you have
the option of deactivating this function - please proceed as follows:
1. While the device is switched on, press the
button for approx. 5 seconds until a
signal tone sounds. Release the button to save the setting.
If you want to reactivate the function, press the
button for about 5 seconds while the
device is switched on until you hear a signal tone. Release the button to save the activation.
SAFETY MEASURMENTS
The SHX fan heater is equipped with protective devices that protect the device and are
designed to prevent a fire.
Please note that neither mechanism is an auto stop or other comfort function. Always
switch the device off, pull out the mains plug and wait until the heater cools down before
you move, clean or store the device.
OVERHEATING PROTECTION
If there is any risk of overheating (e.g. cover of the device, mains overload ... ..), the built-in
overheating protection switches the device off.
As soon as the device cools down, the device automatically switches on and continues as
before.
