Seite
17
von
22
7. Finally, lead the power cable on the underside of the base through the opening
provided on the side of the base to the outside.
8. This ensures a secure position of the heating tower and strain relief for the power
cable.
9. Place the heating tower on a stable, level and heat-insensitive surface.
10. Now insert the mains plug into a suitable socket.
WARNING
Please pay attention to the information on setting up the device in the safety instructions.
DESCRIPTION OF THE CONTROL PANEL AND THE REMOTE CONTROL
You can either use the remote control or use the buttons on the control panel of the device to
operate it.
When operating with the remote control, the remote must be pointed at the sensor on the
device, that proper function is guaranteed.
Control panel
Remote control
Remote control
Please follow instructions below.
1. To operate the remote control, please pull the plastic protection out of the battery
compartment.
2. How to change the battery:
Pull out the battery compartment, remove the old battery and then insert a new one:
3. Always pay attention to the polarity marking (+/-).
4. Afterwards put the battery compartment back into the remote.
