Seite
16
von
22
DESCRIPTION OF THE DEVICE
START UP
INSTALLATION
1. Remove the tower heater from the packaging and remove all packaging materials.
2. Check the device for possible damage.
3. Unwind the power cord and also check it for damage.
4. Slide the two halves of the stand into
each other as shown in the
illustration.
5. Now place the base on the underside
of the tower heater and pull the cable
through the middle of the base.
6. Now fix the heating tower by
screwing the base and the tower
together with the supplied fixing
screws.
Control panel
Display
Remote control
compartment
Air outlet
Display with
chimney
Base
