Shuttle XPC SK21G, Руководство пользователя

Страница: 51 / 72

43
English
AGP Driving Control
This item enables the system to automatically select its output buffer
drive strength or make it manually selectable by an end user.
Ø The Choice: Auto or Manual.
AGP Driving Value
This item enables an end user to manually select the AGP output buffer
drive strength.
Ø Key in a HEX number: Min=0000, Max=00FF.
AGP Fast Write
This item enables an end user to manually select the AGP output buffer
drive strength.
Ø The Choice: Enabled or Disabled.
AGP Master 1 WS Write
When this item enabled, writing to the AGP(Accelerated Graphics Port)
is executed with one wait state.
Ø The Choice: Enabled or Disabled.
AGP Master 1 WS Read
When this item enabled, reading from the AGP (Accelerated Graphics
Port) is executed with one wait state.
Ø The Choice: Enabled or Disabled.
AGP 3.0 Calibration Cycle
If you set Onboard VGA or AGP 3.0 Mode AGP Card, the item is
enable/disable the AGP calibration cycle.
Ø he Choice: Enabled or Disabled.
VGA Share Memory Size
This item defines the onboard VGA shared memory size.
Ø The Choice: Disabled, 16M, 32M or 64M.
DRAM Configuration
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
Current FSB Frequency
This item shows the current CPU Front Side Bus Speed.
Current DRAM Frequency
This item shows the current DRAM speed.