- 41 -
3.3 System Memory Configuration
The MV25/MV25N mainboard has two 168-pin DIMM slots that allow
you to install from 16MB up to 1GB of system memory.
Each 168-pin DIMM (Dual In-line Memory Module) Slot can accommo-
date 16MB, 32MB, 64MB, 128MB, 256MB, and 512MB of PC100/PC133
compliant 3.3V single or double side 64-bit wide data path SDRAM mod-
ules.
Install Memory:
Install memory in any or all of the slots. The combination shown as follows.
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional
SDRAM modules in available DIMM slots. The total system memory is
calculated by simply adding up the memory in all DIMM slots. After
upgrade, the new system memory value will automatically be computed
and displayed in the field " Standard CMOS Setup" of BIOS setup pro-
gram.
DIMM Slot
Memory Modules
Module
Quantity
DIMM 1
16MB, 32MB, 64MB, 128MB, 256M
B, and
512MB 168-pin 3.3V SDR SDRAM DIMM
x 1
DIMM 2
16MB, 32MB, 64MB, 128MB, 256M
B, and
512MB 168-pin 3.3V SDR SDRAM DIMM
x 1
