background image

Shuttle

®

 MV43/MV43N

Pentium 4/Celeron , 478-pin processor based DDR  Mainboard
Manual Version 1.0

Copyright

Copyright

©

 2002 by Shuttle

®

 Inc.  All Rights Reserved.

No part of this publication may be reproduced, transcribed, stored in a retrieval system, trans-
lated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle

®

 Inc.

Disclaimer

Shuttle

®

 Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents.  In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.  The information contained in this manual is provided for
general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

Intel Pentium is a registered trademarks of Intel Corporation.

VIA  is a registered trademarks of VIA Corporation.

PS/2 is a registered trademark of IBM Corporation.

AMI is a registered trademark of AMI Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice:

 Other brand and product names used herein are for identification purposes

only and may be trademarks of their respective owners.

M672

Содержание MV43







































































Отзывы: