Shuttle MV43 Скачать руководство пользователя

Страница: 65 / 70

- 64 -

Parallel Port IRQ

Use this item to assign IRQ to the parallel port.a port address.

The choice: 7,5.

Parallel Port DMA

Use this item to assign a DMA channel to the parallel port.

The choice: N/A.

OnBoard GAME Port

This item enables or disables the I/O address for the GAME Port.

The choice: 201h,209h,Disabled.

OnBoard MIDI Port

Use this item to enable or disable the onboard MIDI port, and to assign a
port address.

MIDI Port IRQ

Use this item to assign IRQ 7 to the parallel port.

The choice: 10,11,5.

OnBoard IDE

Use this item to enable or disable the onboard IDE channel.

The choice: Both,Disabled,Primary or Secondary.

Audio Device

This item enables or disables the AC'97 audio chip.

The choice: Enable or Disable.

Modem Device

This item enables or disables the MC'97 modem chip.

The choice: Enable or Disable.

Ethernet Device

This item enables or disables the onboard Ethernet LAN.

The choice: Enable or Disable.

USB Controller

Use this item to select the USB ports or disabled.

The choice: Disabled, All USB Port, USB1, USB2, USB1&2,

USB3, USB1&3, USB2&3.

Содержание MV43







































































Результаты поиска

Содержание MV43

Отзывы:

Похожие инструкции для MV43

Бренды по названию

Популярные бренды

Shuttle MV43, Руководство пользователя

Результаты поиска

Содержание MV43

Отзывы:

Похожие инструкции для MV43

Бренды по названию

Популярные бренды