- 63 -
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screened
This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Ø
The choice: Blank Screen, V/H SYNC+Blank, or DPMS Supported.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, or Auto.
USB S3 WakeUp Function
This item allows you to enabled/disabled USB device activity to wake
the system from S3.
Ø
The choice: Enabled, Disabled.
HDD Off After
The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disable.
Ø
The choice: Disabled, 1 Min ~ 15 Min.
Power Button Override
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has "hung.".
Ø
The choice: Instant-Off or Delay 4 Sec.
Power State Resme Control
This sets the power state after a shutdown due to an unexpected inter-
rupt of AC power.
Ø
The choice: Always off, Always on, Keep Pre-state.
PM Wake Up Events
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
IRQ [3-7, 9-15], NMI
When enabled, any event occurring at IRQs 3 through 15 (excluding
IRQ 8) will awaken a system, which has been powered down.
Ø
The choice: Enabled, Disabled.
