- 59 -
IDE DMA transfer access
lnternal PCI/IDE field, above, is Disabled.
Ø
The choice: Enabled or Disabled.
IDE Burst Mode
Selecting Enabled reduces latency between each drive read/write cycle,
but may cause instability in IDE subsystems that cannot support such
fast performance. If you are getting disk drive errors, try setting this
value to Disabled. This field does not appear when the lnternal PCI/IDE
field, above, is Disabled.
Ø
The choice: Enabled or Disabled.
SIS OnChip PCI Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
SIS-7012 AC97 AUDIO
This item allows you to control the onboard AC 97 audio.
Ø
The Choice: Enabled or Disabled.
SIS-7013 S/W Modem
This item allows you to control the onboard modem.
Ø
The Choice: Enabled or Disabled.
System Share Memory Size
This Item will be disabled by BIOS code. It is for 650 chipsets.
Ø
The choice: 4MB, 8MB, 16MB, 32MB, or 64MB.
Onboard Super IO Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) in-
stalled on the system board and you want to use it. If you install add-on
FDC or the system has no floppy drive, select Disabled in this field.
Ø
The choice: Enabled or Disabled.
Onboard Serial Port1/Port2
Select an address and corresponding interrupt for the first and second
serial ports.
Ø
The choice: 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, 2F8/IRQ3,Auto, or
Disabled.