- 67 -
Run VGABIOS if S3 Resume (Auto)
Run VGABIOS if S3 Resume (Auto)
Run VGABIOS if S3 Resume (Auto)
Run VGABIOS if S3 Resume (Auto)
Run VGABIOS if S3 Resume (Auto)
This item allows the system to initialize the VGA BIOS from S3 ( Sus-
pend to RAM ) sleep state.
Power Management (User Define)
Power Management (User Define)
Power Management (User Define)
Power Management (User Define)
Power Management (User Define)
This item like a master switch for the power - saving modes and hard
disk timeouts. If this item is set to Max Saving, power - saving modes
occur after a short timeout. If the item is set to Min Saving, power -
saving modes occur after a long timeout. If the item is set to User De-
fine, you can insert your own timeouts for the power - saving modes.
"
The choice: User Define, Min Saving, or Max Saving.
Video Off Method (DPMS)
Video Off Method (DPMS)
Video Off Method (DPMS)
Video Off Method (DPMS)
Video Off Method (DPMS)
This item defines if the video is powered down to save power. This item
is set to DPMS ( Display Power Management Software ) by default.
"
The choice: Blank Screen, V/H SYNC+Blank,or DPMS.
Video Off In Suspend (Yes)
Video Off In Suspend (Yes)
Video Off In Suspend (Yes)
Video Off In Suspend (Yes)
Video Off In Suspend (Yes)
This item defines if the video is powered down when the system is put
into suspend mode.
"
The choice: Yes or No.
Suspend Type (Stop Grant)
Suspend Type (Stop Grant)
Suspend Type (Stop Grant)
Suspend Type (Stop Grant)
Suspend Type (Stop Grant)
This item allows you to select the Suspend Type. If this item is set to the
default Stop Grant, the CPU will to into Idle Mode druing power saving
mode.
"
The choice: PwrOn Suspend, Stop Grant.
MODEM Use IRQ (3)
MODEM Use IRQ (3)
MODEM Use IRQ (3)
MODEM Use IRQ (3)
MODEM Use IRQ (3)
This item determines the IRQ in which the MODEM can use. If you
want an incoming call on a modem to automatically resume the system
from a power-saving mode, use this item to specify the interrupt request
line ( IRQ ) that is used by the modem. You might have to connect the
fax/modem to the mainboard Wake On Modem connector for this
feature to work.
"
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
Suspend Mode (Disabled)
Suspend Mode (Disabled)
Suspend Mode (Disabled)
Suspend Mode (Disabled)
Suspend Mode (Disabled)
When this item enabled and after the set up time of system inactivity, all
devices except the CPU will be shut off.
"
The choice: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 12 Min,
20 Min, 30 Min, 40Min, or 1 Hour.
