Shuttle HOT-673, Руководство пользователя

Страница: 36 / 49

- 36 -
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
The choice: 1, 3, 4, 5, 7, 9, 10, 11, N/A.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at slower
speed while all other devices still operate at full speed.
Standby Mode
When enabled and after the set time of system inactivity, the fixed disk drive and the
video would be shut off while all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will
be shut off.
HDD Power Down
This item defines the continuous HDD idle time before the HDD enters power saving
mode (motor off). The options are from 1 min to 15 min and
Disabled .
Throttle Duty Cycle
This item determines the duty cycle for the clock control thermal throttling mode. The
duty cycle indicates the percentage of time while in the thermal throttle mode. The
settings between 12.5% and 87.5%.
VGA Active Monitor
If this item is set to Enabled, the VGA activity event will be monitored to reload global
timer.
Soft-Off by PWR-BTTN
The setting of Instant-Off allows the ATX switch to function as a normal system power
off button when pressed for less than 4 seconds. The setting of Delay 4 Sec. allows the
button to have a dual function where to press the button for less than 4 seconds will place
the system in suspend mode, and pressing the button for more than 4 seconds will shut
place the system off.
Resume by Ring
This item determine the system will resume by activating of modem ring.
Resume by Alarm
This item determine the system will resume by activity of R.T.C. If enabled this feature
and enter resume date and time. When date and time expire, system will power-on itself
from power off.
IRQ 8 Break Suspend
You can turn On or Off monitoring of IRQ8 (the Real Time Clock) so it does not awaken
the system from Suspend mode.