Shuttle HOT-597 Скачать руководство пользователя | Manualshive

Страница: 34 / 45

background image

- 33 -

Video BIOS Cacheable

When enabled. The Video BIOS cache will cause access to video BIOS addressed at
C0000H to C7FFFH to be cached, if the cache controller is also enabled.
The Choice: Enabled, Disabled.

System BIOS Cacheable

As with caching the Video BIOS above, enabling this selection allows accesses to the
system BIOS ROM addressed at F0000H ~ FFFFFH to be cached, provided that the cache
controller is enabled.
The Choice: Enabled, Disabled.

Memory Hole At 15MB Addr

In order to improve performance, some space in memory can be reserved for ISA cards.
This memory must be mapped into the memory space below 16 MB.
This Choice: Disabled, 15M-16M.

AGP Aperture Size

Select the size of Accelerated Graphics Port (AGP) aperture. The aperture is a portion of
the PCI memory address range dedicated for graphics memory address space. Host cycles
that hit the aperture range are forwarded to the AGP without any translation.
See www.apgforum.org for AGP information.
The Choice: 4M, 8M, 16M, 32M, 64M, 128M, 256M

AGP-2x Mode

This item allows you to enable/disable AGP-2x function. See www.apgforum.org for AGP
information.
The Choice: Enabled, Disabled.

CPU Core Voltage

Since the mainboard support CPU voltage auto-detecting and setting, this item allows the
user to enable this function when set to Auto. The user can also set CPU core voltage
manually in BIOS from 2.1V to 3.5V.

OnChip USB

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have a USB peripheral.
The Choice: Enabled, Disabled.

Auto Detect DIMM/PCI Clk

Enabling this item allosw system auto detect and close clock signal to empty DIMM/PCI
slot to reduce EMI.

Spread Spectrum Modulated

This item allows the user to enable Spread Spectrum Modulated to reduce the EMI.
The Choice: 1.5%(NTR), 0.6%(CNTR), 1.5%(Down), 0.6%(Down) and Disabled.

«
...
32
33
34
35
36
...
»

Содержание HOT-597














































Отзывы:

Нет отзывов

Похожие инструкции для HOT-597

Бренд: IEI Technology Страницы: 155

Бренд: IEI Technology Страницы: 281

Бренд: IEI Technology Страницы: 151

Бренд: IEI Technology Страницы: 169

Бренд: IEI Technology Страницы: 125

Бренд: IEI Technology Страницы: 165

Бренд: IDT Страницы: 9

Бренд: IEI Technology Страницы: 12

Бренд: Portwell Страницы: 86

Бренд: Supero Страницы: 92

Бренд: TOHATSU Страницы: 7

Бренд: Fujitsu Siemens Computers Страницы: 42

Бренд: Gigabyte Страницы: 120

E-Vision Electric Thruster E300

Бренд: Sleipner Страницы: 28

DUOX Programmer

Бренд: Fermax Страницы: 99

Бренд: Nuvoton Страницы: 14

Бренд: ON Semiconductor Страницы: 19

Бренд: Gigabyte Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды