background image

                                               HOT- 565  User's Manual 19

Standard CMOS Setup

Date

The date format is <day>, <month> <date> <year>.  Press <F3> to show the
calendar.

Time

The time format is <hour> <minute> <second>.  The time is calculated base
on the 24-hour military-time clock. For example. 5 p.m. is 17:00:00.

Hard Disks Type

This item identify the types of hard disk drives that has been installed in the
computer.  There are 46 predefined types and a user definable type.

Press PgUp or PgDn to select a numbered hard disk type or type the number
and press <Enter>.  Note that the specifications of your drive must match
with the drive table.  The hard disk will not work properly if you enter
improper information for this item.  If your hard disk drive type is not
matched or listed, you can use Type User to define your own drive type
manually.

If you select Type User, related information is asked to be entered to the
following items.  Enter the information directly from the keyboard and press
<Enter>.  Those information should be provided in the documentation from
your hard disk vendor or the system manufacturer.

The user may also set those items to AUTO to auto configure hard disk

Содержание HOT-565


































Отзывы: