(D) Supported Host Peripherals:
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø
Leave IDE cables not crossed upon CPU and SDRAM;
Ø
Leave power cables minimum in length, and not crossed upon a mainboard;
Ø
Leave CPU fan cables minimum in length, and not near CPU;
Ø
Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI or AGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
H o s t P e rip h e r a l
P r o d u c t N a m e
M o d e l N a m e
# 1
C a s e
F X 8 3
# 2
S huttle P o w e r S u p p ly
P C 3 5 I2 4 0 2
# 3
IB M H D D ( 8 2 .3 G B )
IC 3 5 L 0 8 0 A V V A 0 7 -0
# 4
C O D E D V D P la y e r
D V D -11 6
# 5
P a n a s o n i c F D D
J U -2 5 7 A 6 0 6 P
