- 74 -
If you set this field to "manual" , choose specific resources by going
into each of the sub-menu that follows this field (a sub-menu is pro-
ceeded by a ">").
Ø
The choice: Auto(ESCD) or Manual.
IRQ/DMA Resources
When resources are controlled manually, assign each system interrupt
a type, depending on the type of device using the interrupt.
IRQ 3/4/5/7/9/10/11/12/14/15 assigned
This item allows you to determine the IRQ assigned to the ISA bus and
is not available to any PCI slot. Legacy ISA for devices is compliant with
the original PC AT bus specification; PCI/ISA PnP for devices is compli-
ant with the Plug-and-Play standard whether designed for PCI or ISA
bus architecture.
Ø
The choice: Legacy ISA or PCI/ISA PnP.
DMA 0/1/3/5/6/7 assigned
When resources are controlled manually, assign each system DMA
channel as one of the following types, depending on the type of device
using the interrupt:
Legacy ISA Devices compliant with the original PC AT bus specifica-
tion, requiring a specific interrupt ( such as IRQ4 for serial port 1). PCI/
ISA PnP Devices compliant with the Plug-and-Play standard, whether
designed for PCI or ISA bus architecture.
Ø
The choice: Legacy ISA or PCI/ISA PnP.
Assign IRQ For VGA
This item allows the user to set VGA IRQ Routing table Enabled or
Disabled.
Ø
The choice: Enabled or Disabled.
Assign IRQ For USB
This item allows the user the option to assign an IRQ to on-board USB
controller.
Since the on-board controller is always enabled, if no IRQ is assigned
to it, there will be a question mark report on the sytem device under
Windows95/98.
Ø
The choice: Enabled or Disabled.
