7
If the network cannot be set, please check the status of your Wi-Fi router, reset
the D230 device and connect again.
2.2.3
Connecting a mobile phone to the D230 device
Steps
1.
Tap “Go to the Wi-Fi settings on your phone” on the
D230 Tool.
2.
In the Wi-Fi settings of your mobile phone, please
select the relevant network you want to connect the
D230 device to.
Default Information when connecting to D230
device:
Network name (SSID)
: D230_XXXXX (The serial number
of the D230 device is on the back of the device. The last 5
digits are part of the SSID. For example, if the S/N is D230001001J24F56789, the default
SSID then is "D230_56789".)
Security
Mode : WPA2
Password
: 12345678
3.
Once the D230 device is connected, please go back to
the D230 Tool.
4.
Tap “start” to complete the D230 device Wi-Fi
settings (SSID: AP12345) and the mobile device to
disconnect from the D230 device (SSID:
D230_XXXXX).
5.
Make sure your mobile and D230 device are
connected to the same Wi-Fi (SSID: AP12345).
