Shuttle av61, Руководство пользователя

Страница: 48 / 65

- 46 -
Quick Power On Self Test
This item speeds up Power On Self Test (POST) after you power on the
computer. If it is set to Enabled, BIOS will shorten or skip some check
items during POST.
Boot Sequence
This item determines which drive computer searches first for the disk
operating system. Default setting is A, C, SCSI.
BIOS also support system boot from CD-ROM drive or SCSI hard disk
drive.
Swap Floppy Drive
When this item enables, the BIOS will swap floppy drive assignments
so that Drive A: will function as Drive B: and Drive B: as Drive A:.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is
40 or 80 tracks.
Boot Up NumLock Status
When this option enables, BIOS turns on Num Lock when system is
powered on.
Gate A20 Option
This entry allows you to select how the gate A20 is handled. The gate
A20 is a device used to address memory above 1 MByte. Initially, the
gate A20 was handled via a pin on the keyboard. Today, while key-
boards still provide this support, it is more common, and much faster,
set to Fast for the system chipset to provide support for gate A20.
Memory Parity/ECC Check
This item allows you to Enabled/Disabled memory error checking and
correction (ECC). In order for ECC to function, 9-chip (8 memory
chips + 1 ECC chip) SDRAM modules must be installed on the
mainboard.
Typematic Rate Setting
This determines if the typematic rate is to be used. When disabled,
continually holding down a key on your keyboard will generate only
one instance. In other words, the BIOS will only report that the key is
down. When the typematic rate is enabled, the BIOS will report as
before, but it will then wait a moment, and, if the key is still down, it
will begin the report that the key has been depressed repeatedly.