- 54 -
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
The choice: 10 Sec, 20 Sce, 30 Sec, 40 Sec, 1 Min, 2 Min, 4 Min, 6
Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min, 1 Hour, Disabled.
** PM Events **
PM events are I/O events whose occurrence can prevent the system
from entering a power saving mode or can awaken the system from
such a mode. In effect, the system remains alert for anything occurs to
a device which is configured as On, even when the system is a power
down mode.
VGA
When set to On, any event occurring at a VGA port will awaken a
system which has been powered down.
The choice: On, Off.
LPT & COM
When set to LPT/COM (default), any event occurring at a COM (Serial)
/ LPT port will awaken a system which has been powered down.
The choice: LPT/CON, NONE, LPT, COM.
HDD & FDD
When set to On (default), any event occurring at a hard or floppy drive
port will awaken a system which has been powered down.
The choice: On, Off.
DMA/master
This item Enabled/Disabled the DMA Master Function.
The choice: On, Off.
Modem Ring Resume
When set to Enabled, any event occurring Modem Ring/activity of
LAN will awaken a system which has been powered down.
The choice: Enabled, Disabled.
RTC Alarm Resume
When set to Enabled RTC Alarm Resume, you could set the date (of
month) and timer (hh:mm:ss), any event occurring at RTC will awaken
system which has been powered down.
The choice: Enabled, Disabled.
