manualshive.com logo in svg

Shuttle AV11, Руководство пользователя

Поделиться
Скачать
Shuttle AV11 Скачать руководство пользователя страница 34

- 32 -

ATX Power Supply Connector (J5)

Locate the 20-pin male header ATX power connector (J5) on your
mainboard.  Plug the power cable from the ATX power supply unit directly
into J5 ATX power supply connector.

Note 1:

The ATX power connector is directional and will not go in unless
the guides match perfectly making sure that pin#1 is properly
positioned.

Note 2:

Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.

Note 3:

This mainboard requires an ATX power supply of at least 200 watts
with power good signal.

CPU, Cooling Fan Connectors (JP1, JP2, J9, J12)

The mainboard provides four onboard 12V cooling fan power connectors to
support CPU (JP1), Chassis (JP2), (J9) and (J12) cooling fans.

17

Note:

Both cable wiring and
type of plug may vary
depending on the fan
maker.  Keep in mind
that the red wire should
always be connected to
the +12V header and
the black wire to the
ground (GND) header.

18

Содержание AV11




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды