- 36 -
#
#
#
#
#
Internal Peripherals Connectors
Enhanced IDE, IDE RAID (AK35GTR only), and Floppy
Connectors
The mainboard features two 40-pin dual-channel IDE device connectors
(IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM
and Hard Disk Drives (H.D.D.) and features two 40-pin dual-channel IDE
RAID device connectors (RAID1/RAID2) providing support for up to four IDE
devices, such as Hard Disk Drives (H.D.D.).
This mainboard also includes one 34-pin floppy disk controller (FDD1) to
accommodate the Floppy Disk Drive (FDD). Moreover, this mainboard
comes with one 80-pin ATA
100/66/33
ribbon cable to connect to IDE
(RAID) H.D.D. and one 34-pin ribbon cable for F.D.D. connection.
Note :
If you used RAID1 connector, please refer to
IDE
RAID Manual
to setup RAID BIOS program.
Important:
Ribbon cables are directional, therefore, make sure to always
connect with the red cable.
,
ID E2
ID E1
FDD 1
1
1
1
ID
E2
ID
E1
FD
D
RAID 1
IDE3
RAID 2
IDE4
1
1
