manualshive.com logo in svg

Shure UHF WIRELESS microphone system, Руководство пользователя

Поделиться
Скачать
Shure UHF WIRELESS microphone system Скачать руководство пользователя страница 32

ENGLISH

31

TIPS FOR ACHIEVING OPTIMUM PERFORMANCE

S

Maintain a line-of-sight between the transmitter and receiver antennas.

Avoid placing transmitter and receiver where metal or other dense materi-

als may be present.

S

Avoid placing the receiver near computers or other RF generating equip-

ment.

S

Avoid placing the receiver in the bottom of an equipment rack unless the

antennas are remotely located.

S

Use the proper receiver antennas.

S

Point the antenna tips away from each other at a 45

°

 angle from vertical,

and keep them away from large metal objects.

S

Maintain a distance of at least 10 ft between the transmitter and receiver to

prevent overloading the receiver.

S

Do not obstruct the transmitter antennas with your hands.

S

Use the proper cable when remotely locating receiver antennas. For best per-

formance, use Shure UA825 or UA850 low loss coaxial antenna cable, or 50

Ω

low loss cable such as RG8.

S

Use Shure UA830 Active Remote Antenna Kit for remote antenna placement.

S

Mount diversity antennas at least 1/4 wave apart, although spacing of 1.5 m

(60 inches) or more is preferred. Achieve this by remote placement of one

or both antennas using Shure UA825 or UA850 low–loss coaxial cable and

a Shure UA830 Active Remote Antenna Kit. For multiple system installa-

tions, use the Shure UA845 Antenna/Power Distribution System.

TROUBLESHOOTING

The following table identifies some common problems and their solutions. If un-

able to solve a problem, contact your dealer or the Shure Service Department at

1-800-516-2525 (7:30 am to 4:00 pm, Central Standard Time). In Europe, call

49-7131-72140; other international users call Shure in the U.S.A. at  847-600-2000.

Problem

Solution

No sound; receiver

RF light(s) and

AUDIO LEDs not

glowing.

Make sure Power switches on transmitter and receiver are on.

Check transmitter Power/Battery Fuel Gauge. Replace battery if

necessary.

Make sure transmitter and receiver frequency Group/Channel set-

tings are identical.

Check receiver squelch setting.

Check receiver antenna connection(s).

Make sure at least one antenna is in the line of sight of the transmit-

ter. If necessary, reduce the distance between transmitter and re-

ceiver.

Содержание UHF WIRELESS microphone system





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды