background image

ENGLISH

16

6. When the new name has been completely entered, press the MENU button.

“SAVE?” appears, followed by “+ YES – NO”. Press the  “+” button to save the new

name and return to the Group/Channel/TV display. Press the “–” button to make

more changes. See Figure 24.

FIGURE 24

NOTE:

 If more than 20 seconds of inactivity elapse, the display will return to the

original settings.

Changing Receiver Squelch Level Setting

Higher squelch settings demand a quieter signal before muting the receiver, but

reduce operating range. Lower squelch settings extend the operating range, but in-

crease noise levels before dropout occurs. To change the receiver Squelch setting,

proceed as follows:

1. Press the MENU button. The “+ MENU –” display appears, as shown in Figure 25.

FIGURE 25

2. Press either the + or – button to reach the “SET SQCH” display, shown in Figure 26.

FIGURE 26

3. Press the SELECT button to display the current squelch level, as shown in Figure

27 (factory preset value is “0.0”).

FIGURE 27

MID

4. Press either the “+” or “–” button to change the Squelch setting in increments of

0.5 until reaching the desired level. The Squelch setting actually changes the mo-

ment you press the “+” and “–” buttons.

Содержание UHF WIRELESS microphone system





































Отзывы: