-10 0 mic
SLX
m
u
te
se
le
ct
BIAS
AUDIO
0dB
-10dB
select
i8
i8
Incompatible
CHANNEL
i8
i8
MASTER LIST
Incompatible
GROUP
select
5
i8 i8
Incompatible
GROUP
CHANNEL
select
+
i8 i8
GROUP
CHANNEL
i8 i8
GROUP
CHANNEL
i8 i8
Incompatible
GROUP
CHANNEL
Adjusting Gain
Three gain settings are available on the SLX1. Choose
the appropriate setting for your instrument.
•
mic: Microphone (higher amplification)
•
0: Guitar with passive pickups (medium amplification)
•
–10: Guitar with active pickups (lower amplification)
Adjusting Gain
Access the gain adjustment switch by unscrewing the head of
the microphone.
Two gain settings are available on the SLX2. Choose a setting
appropriate for vocal volume and for the performing environ-
ment. Use the tip of a pen or a small screwdriver to move the
switch.
•
0dB: For quiet to normal vocal performance.
•
–10dB: For loud vocal performance.
If the receiver LED indicates the input volume is
overloading the receiver, try switching the gain to
a lower setting.
SLX1 and SLX2 Transmitter Programming
Manually Select a Group and/or Channel
1. Press and hold the select button until the GROUP and CHANNEL displays alternate.
2. To change the group setting, release the select button while GROUP is displayed. While GROUP is
flashing, pressing select increases the group setting.
3. To change the channel setting, release the select button while CHANNEL is displayed. While CHANNEL
is flashing, pressing select increases the channel setting.
Lock or Unlock Transmitter Settings
Press the mute and select buttons simultaneously to lock or un-
lock the transmitter settings. When locked, the current settings
cannot be changed manually.
Locking the transmitter does
not disable infrared synchronization.
SLX1 & SLX2 LCD
Battery Status
Indicates charge remaining in transmitter batteries.
INCOMPATIBLE Frequency Warning
The INCOMPATIBLE warning indicates that the receiver and transmitter
are set to incompatible frequency bands. Contact your Shure retailer for
assistance.
Master List Indicator
Indicates that a master list frequency is currently in use. No group or
channel information is displayed.
Note:
the transmitter cannot be used to change master list settings.
9
ENGLISH
SLX1
SLX2
