manualshive.com logo in svg

Shure SCM820 Digital IntelliMix, Руководство пользователя, Страница: 22 / 33

Поделиться
Скачать
Shure SCM820 Digital IntelliMix Скачать руководство пользователя страница 22

20

1) Channel Name

Channel names can be customized with up to 31 any characters in length 

except ‘=’,’.’ or ‘@’.

2) Source

Sets the audio input to one of two sources: 

•  Analog (default): Audio is from a microphone or line-level audio source 

connected to a channel input on the mixer back panel.

•  Network: Audio is from the Dante digital audio network. Dante Controller 

software is required to properly route audio to the channel inputs.

3) Input Gain Level

Selects the analog input gain level for each channel. 

•  Mic (+46 dB): For less sensitive microphones such as dynamics.

•  Mic (+26 dB): For loud talkers or sensitive microphones such as 

condensers.

•  Line (+0dB): For line-level sources such as mixer inserts.

Note: Gain is disabled when the audio source is set to Network.

4) Phantom Power (+48V)

When selected, the button illuminates blue to indicate 48 V phantom 

power is supplied to the microphone. Use this setting for condenser 

microphones. 

Note: Disabled when Input Gain Level is set to Line (+0dB) or Network is 

selected for the audio source .

5) Low Cut

Ideal for attenuating low-frequency vibration caused by table vibrations 

or air-conditioning rumble. Adjust the frequency of the 12 dB/octave filter 

from 25 - 320 Hz.

6) High Shelf

For tempering sibilant speech or enhancing the sound of off-axis 

microphones. Use this to boost or cut the signal by 12 dB at 5 kHz.

7) Channel On Indicators

The two indicators illuminate green when the channel is open to that mix 

bus (Mix A or Mix B). When set to Dual Mixer, the A and B indicators 

function separately for each mix.

8) Clip Indicator

Illuminates when the signal is clipping the input preamp. The light will stay 

lit as a warning for 2 seconds. Select a lower Input Gain Level to avoid 

clipping.

Input 

9) Input Meter

Displays signal level information. The meter is customizable in the 

Preferences tab to monitor the following options: 

•  Realtime monitoring of the input signal level (default) or IntelliMix Gain 

attenuation.

•  Pre- or post-fader Input signal level.

•  VU + Peak (default), Peak, or VU metering of input signal level.

10) Channel Fader and Gain Value

Adjusts the channel volume from -110 dB to +18 dB.

11) Group (Fader and Mute)

Each channel can join a fader or mute group, which enable the 

adjustment of several channels at once. There is one Fader and one 

Mute group for each Link Group.

12) Mute Button

Mutes the audio for that channel. A muted channel still can still be soloed 

to the headphones for monitoring. Channel Mute Control can be set to 

one of two places from the IntelliMix tab:

•  Pre-IntelliMix: Audio is muted before MaxBus or IntelliMix decisions.

•  Post-IntelliMix: Audio is muted after contributing to IntelliMix and Maxbus 

decisions.

13) Solo Button

Solos the selected channel to the headphone jack for monitoring.

14) Aux Routing

Routes the aux channel to the selected mix output. The aux channel 

routes without automixing to the mix outputs.

15) Aux Link Mode

Defines the aux channel routing when the device is in a Link Group: 

•  Global (default): Aux audio appears at the outputs of all linked mixers.

•  Local: Aux audio appears only at that mixer’s output.

16) Copy Channel

Copies the selected channel’s Input settings to the device or to the entire 

Link Group.

 

⑤
⑥

⑦

⑧

⑨

⑩

⑪

⑫

⑬

⑭

①

②

③

④

⑮

Содержание SCM820 Digital IntelliMix


































Отзывы:

Нет отзывов