background image

Shure Incorporated

5/21

General Description

Offering uniquely tailored wireless solutions for vocalists, guitarists, and 

presenters, PGX-Digital combines the trusted legacy of Shure wired micro-

phones with state-of-the-art, 24-bit digital wireless technology to deliver 
strong, clean RF performance. The result is wireless audio that sounds like 
wired, rock-steady RF signal even at extended distances, and plug-and-
play setup and operation.

Professional quality 24-bit digital audio

Digital RF technology for rock-solid performance

Wide variety of rugged and dependable Shure microphones

One-touch setup and operation

Up to 10 hours of battery life (9 hours, PGXD2)

Up to 200 foot range (line-of-sight)

• 900 MHz operation—free from white spaces or DTV interference

System Components

All systems include

PGXD4 receiver

2 AA alkaline batteries

Power supply

User guide

Vocalist systems include

PGXD2 handheld transmitter

Microphone head (choice of PG58, SM58®, SM86, Beta 58A® or Beta 87A*)

Available only in select markets

Microphone clip

Lavalier, Headworn, and Instrument systems include

PGXD1 bodypack transmitter

Microphone (choice of WL93, WL185, PG30 or Beta 98H/C)

Guitar systems include

PGXD1 bodypack transmitter

Содержание PGXD Series






















Отзывы: