![background image](http://html.mh-extra.com/html/shure/pa411/pa411_quick-start-manual_1261137002.webp)
The Shure PA411 Antenna Combiner distributes DC power and RF signal
for up to four Shure PSM
®
300 transmitters. The compact half-rack system
significantly reduces the amount of antennas and power supplies needed
when using multiple systems.
Included Components
•
(1) PA411 Antenna Combiner
•
(1) 1-to-4 Power Distribution Cable
•
(1) PS60 Power Supply
•
(1) Rack Mounting Kit
•
(1) BNC Bulkhead Adapter
•
(4) 22-inch BNC-BNC Coaxial Cables
Note:
Antenna is not included. Please use the antenna that shipped with the
PSM transmitters or other antenna from the appropriate frequency range.
Front and Rear Panels
ྙ
ྚ
ྛ ྜ
POWER INPUT
POWER OUT
RF ANTENNA INPUTS
ྜྷ
ྞ
ྟ
① RF Output Antenna Connector
Use the ¼ wave antenna supplied with the P3T transmitter, or any other Shure antennas that cover 470-865 MHz
② RF LED Indicators
Green :
RF signal present
Red:
RF signal overload
③ Power LED
Green :
Power on
Green/red flashing:
Power output overload
④ Power Switch
⑤ Power Input
Requires a Shure PS60 power supply
⑥ Power Output
Requires a Shure PS411-PC power distribution cable to deliver power to transmitters
⑦ RF Inputs
Connect to transmitter RF outputs
Power and RF Connections
1. Connect the Shure PS60 power supply to a power outlet and to the power input on the PA411.
2. Connect the 1-to-4 power cable to the DC power output on the PA411.
3. Connect a power terminal from the 1-to-4 power cable to each P3T transmitter power input.
4. Connect an antenna to the P3T antenna output on the front panel. Acceptable antennas include the ¼-wave antenna supplied with the P3T transmitter or
any Shure antennas that cover 470-865 MHz.
5. Connect each P3T antenna output to an antenna input on the PA411, using BNC coaxial cable.
Shure Incorporated
PA411
Antenna Combiner
2017/10/31
2/4