background image

3

 

User Manual

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions. 

2. KEEP these instructions. 

3. HEED all warnings.

4. FOLLOW all instructions. 

5. DO NOT use this apparatus near water. 

6. CLEAN ONLY with dry cloth. 

7. DO NOT block any ventilation openings. Allow sufficient distances for 

adequate ventilation and install in accordance with the manufacturer’s 

instructions. 

8. DO NOT install near any heat sources such as open flames, radiators, 

heat registers, stoves, or other apparatus (including amplifiers) that pro-

duce heat. Do not place any open flame sources on the product. 

9. DO NOT defeat the safety purpose of the polarized or groundingtype 

plug. A polarized plug has two blades with one wider than the other. A 

grounding type plug has two blades and a third grounding prong. The 

wider blade or the third prong are provided for your safety. If the provided 

plug does not fit into your outlet, consult an electrician for replacement of 

the obsolete outlet. 

10.  PROTECT the power cord from being walked on or pinched, particu-

larly at plugs, convenience receptacles, and the point where they exit 

from the apparatus. 

11.  ONLY USE attachments/accessories specified by the manufacturer.

12.  USE only with a cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use cau-

tion when moving the cart/apparatus combination to avoid injury from 

tip-over.

13.  UNPLUG this apparatus during lightning storms or when unused for 

long periods of time. 

14.  REFER all servicing to qualified service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as 

power supply cord or plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has been exposed to rain or 

moisture, does not operate normally, or has been dropped. 

15.  DO NOT expose the apparatus to dripping and splashing. DO NOT put 

objects filled with liquids, such as vases, on the apparatus. 

16.  The MAINS plug or an appliance coupler shall remain readily operable. 

17.  The airborne noise of the Apparatus does not exceed 70dB (A). 

18.  Apparatus with CLASS I construction shall be connected to a MAINS 

socket outlet with a protective earthing connection. 

19.  To reduce the risk of fire or electric shock, do not expose this appara-

tus to rain or moisture. 

20.  Do not attempt to modify this product. Doing so could result in personal 

injury and/or product failure.

21.  Operate this product within its specified operating temperature range.

SAFETY PRECAUTIONS

The possible results of incorrect use are marked by one of the two sym-

bols—"WARNING" and "CAUTION"—depending on the imminence of the 

danger and the severity of the damage. 

WARNING: Ignoring these warnings may cause se-

vere injury or death as a result of incorrect operation.
CAUTION: Ignoring these cautions may cause moder-

ate injury or property damage as a result of incorrect 

operation.

CAUTION

• 

Never disassemble or modify the device, as failures may result.

• 

Do not subject to extreme force and do not pull on the cable or failures 

may result.

• 

Keep the product dry and avoid exposure to extreme temperatures and 

humidity.

WARNING

• 

If water or other foreign objects enter the inside of the device, fire or 

electric shock may result.

• 

Do not attempt to modify this product. Doing so could result in personal 

injury and/or product failure.

This device is able to produce sound volume higher than 85 dB SPL. 

Please check your maximum allowed continuous noise exposure level 

based on your national employment protection requirements. 

WARNING

LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE 

PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS 

POSSIBLE.

 Over exposure to excessive sound levels can damage your 

ears resulting in permanent noise-induced hearing loss (NIHL). Please 

use the following guidelines established by the Occupational Safety Health 

Administration (OSHA) on maximum time exposure to sound pressure lev-

els before hearing damage occurs. 

90 dB SPL 

at 8 hours

95 dB SPL 

at 4 hours

100 dB SPL 

at 2 hours

105 dB SPL 

at 1 hour

110 dB SPL 

at ½ hour

115 dB SPL 

at 15 

minutes

120 dB SPL 

Avoid or dam-

age may occur

WARNING

• 

Battery packs may explode or release toxic materials. Risk of fire or 

burns. Do not open, crush, modify, disassemble, heat above 140°F 

(60°C), or incinerate

• 

Follow instructions from manufacturer

• 

Never put batteries in mouth. If swallowed, contact your physician or local 

poison control center

• 

Do not short circuit; may cause burns or catch fire

• 

Do not charge or use battery packs with other than specified Shure 

products

• 

Dispose of battery packs properly. Check with local vendor for proper 

disposal of used battery packs

• 

Batteries (battery pack or batteries installed) shall not be exposed to 

excessive heat such as sunshine, fire or the like

WARNING: 

Danger of explosion if battery incorrectly replaced. Operate 

only with Shure compatible batteries.

Note: 

Use only with the included power supply or a Shure-approved 

equivalent. 

IMPORTANT SAFETY INSTRUCTIONS

1.  READ these instructions. 

2.  KEEP these instructions. 

3.  HEED all warnings.

4.  FOLLOW all instructions. 

5.  DO NOT use this apparatus near water. 

6.  CLEAN ONLY with dry cloth. 

7.  DO NOT block any ventilation openings. Allow sufficient distances for adequate ventila-

tion and install in accordance with the manufacturer’s instructions. 

8.  DO NOT install near any heat sources such as open flames, radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open 

flame sources on the product. 

9.  DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized 

plug has two blades with one wider than the other. A grounding type plug has two blades 

and a third grounding prong. The wider blade or the third prong are provided for your 

safety. If the provided plug does not fit into your outlet, consult an electrician for replace-

ment of the obsolete outlet. 

10.  PROTECT the power cord from being walked on or pinched, particularly at plugs, conve-

nience receptacles, and the point where they exit from the apparatus. 

11.  ONLY USE attachments/accessories specified by the manufacturer.

12.  USE only with a cart, stand, tripod, bracket, or table specified by the manu-

facturer, or sold with the apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid injury from tip-over.

13.  UNPLUG this apparatus during lightning storms or when unused for long 

periods of time. 

14.  REFER all servicing to qualified service personnel. Servicing is required when the ap-

paratus has been damaged in any way, such as power supply cord or plug is damaged, 

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has been dropped. 

15.  DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with 

liquids, such as vases, on the apparatus. 

16.  The MAINS plug or an appliance coupler shall remain readily operable. 

17.  The airborne noise of the Apparatus does not exceed 70dB (A). 

18.  Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a 

protective earthing connection. 

19.  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or 

moisture. 

20.  Do not attempt to modify this product. Doing so could result in personal injury and/or 

product failure.

21.  Operate this product within its specified operating temperature range.

This symbol indicates that dangerous voltage constituting a risk of 

electric shock is present within this unit. 

This symbol indicates that there are important operating and mainte-

nance instructions in the literature accompanying this unit. 

WARNING: 

This product contains a chemical known to the State of California to cause cancer and birth 

defects or other reproductive harm.

IMPORTANT SAFETY INSTRUCTIONS

1.  READ these instructions. 

2.  KEEP these instructions. 

3.  HEED all warnings.

4.  FOLLOW all instructions. 

5.  DO NOT use this apparatus near water. 

6.  CLEAN ONLY with dry cloth. 

7.  DO NOT block any ventilation openings. Allow sufficient distances for adequate ventila-

tion and install in accordance with the manufacturer’s instructions. 

8.  DO NOT install near any heat sources such as open flames, radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open 

flame sources on the product. 

9.  DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized 

plug has two blades with one wider than the other. A grounding type plug has two blades 

and a third grounding prong. The wider blade or the third prong are provided for your 

safety. If the provided plug does not fit into your outlet, consult an electrician for replace-

ment of the obsolete outlet. 

10.  PROTECT the power cord from being walked on or pinched, particularly at plugs, conve-

nience receptacles, and the point where they exit from the apparatus. 

11.  ONLY USE attachments/accessories specified by the manufacturer.

12.  USE only with a cart, stand, tripod, bracket, or table specified by the manu-

facturer, or sold with the apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid injury from tip-over.

13.  UNPLUG this apparatus during lightning storms or when unused for long 

periods of time. 

14.  REFER all servicing to qualified service personnel. Servicing is required when the ap-

paratus has been damaged in any way, such as power supply cord or plug is damaged, 

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has been dropped. 

15.  DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with 

liquids, such as vases, on the apparatus. 

16.  The MAINS plug or an appliance coupler shall remain readily operable. 

17.  The airborne noise of the Apparatus does not exceed 70dB (A). 

18.  Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a 

protective earthing connection. 

19.  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or 

moisture. 

20.  Do not attempt to modify this product. Doing so could result in personal injury and/or 

product failure.

21.  Operate this product within its specified operating temperature range.

This symbol indicates that dangerous voltage constituting a risk of 

electric shock is present within this unit. 

This symbol indicates that there are important operating and mainte-

nance instructions in the literature accompanying this unit. 

WARNING: 

This product contains a chemical known to the State of California to cause cancer and birth 

defects or other reproductive harm.

10/02/12

Содержание MICROFLEX SERIES

















































Отзывы: