Shure Incorporated
9/13
◦
1.
2.
3.
1.
2.
3.
◦
To send the automix signal to other Dante sources, route to the appropriate Dante output. Use Dante Controller to
route IntelliMix Room Dante outputs to non-Shure devices.
Note:
If you're using a non-Shure Dante microphone, use Dante Controller to route the near-end signal to IntelliMix Room.
Applying DSP Blocks
To apply DSP blocks:
Open a location that contains an IntelliMix Room installation.
Select the installation and click Configure.
In Schematic view, click a DSP block to open the settings window. You can also access DSP blocks from the Inputs and
Outputs tabs.
Routing Far-End Audio to IntelliMix Room
To use acoustic echo cancellation (AEC), you need to route a far-end signal to the software. The AEC uses that far-end signal
as a reference and blocks it from being sent back to the far end as echo.
Each input channel can use a different AEC reference source. If all channels use the same source, select the AEC reference
source on each input channel.
In your conferencing software's settings, select
IntelliMix Room Echo Cancelling Speakerphone
as the playback de
vice. This sends the far-end signal to IntelliMix Room's virtual audio input.
Open IntelliMix Room's configuration window in Designer.
On each microphone input channel, select AEC. Choose the far-end reference source from the menu.
For best results, use the signal that feeds your local reinforcement system as the reference source.
Содержание IntelliMix Room
Страница 13: ...Shure Incorporated 13 13...
